sogc 01, 03, 05 vishay dale thick film resistor networks, dual-in-line, wide body, small outline, molded dip, surface mount www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31506 406 revision: 27-apr-10 features ? isolated, bussed and dual terminator schematics available ? 0.110" (2.79 mm) maximum seated height ? rugged, molded case construction ? 0.050" (1.27 mm) lead spacing ? reduces total assembly costs ? compatible with automatic surface mounting equipment ? uniform performance characteristics ? meets eia pdp 100, sogn -0003 outline dimensions ? available in tube pack or tape and reel pack ? compliant to rohs directive 2002/95/ec notes ? 100 m maximum on 0 -jumper. (1) 2 % standard, 1 % and 5 % available. (2) continuous working voltage shall be or maximum working voltage, whichever is less. * pb containing terminations are not rohs compliant, excemptions may apply standard electrical specifications global model schematic power rating tolerance (1) % resistance range maximum working voltage (2) v dc temperature coefficient ppm/c element p 70 c w pac k ag e p 70 c w sogc16 01 0.1 1.6 1, 2, 5 10 to 1m 50 100 03 0.19 1.6 1, 2, 5 10 to 1m 50 100 05 0.1 1.6 2, 5 10 to 1m 50 100 sogc20 01 0.1 2.0 1, 2, 5 10 to 1m 50 100 03 0.19 2.0 1, 2, 5 10 to 1m 50 100 05 0.1 2.0 2, 5 10 to 1m 50 100 global part number information new global part numbering: sogc200310k0gdc (preferred part number format) global model pin count schematic resistance value tolerance code packaging special sogc 16 20 01 = bussed 03 = isolated 00 = special r = k = k m = m 10r0 = 10 680k = 680 k 1m00 = 1.0 m f = 1 % g = 2 % s = special z = 0 jumper ej = lead (pb)-free, tube ea = lead (pb)-free, tape and reel dc = tin/lead, tube rz = tin/lead, tape and reel blank = standard (dash number) (up to 3 digits) from 1 to 999 as applicable historical part number example: sogc2003103g (will continue to be accepted) sogc 20 03 103 g d02 historical model pin count schematic resistance value tolerance code packaging new global part numbering: sogc1605131agrz (preferred part number format) global model pin count schematic resistance value tolerance code packaging special sogc 16 20 05 = dual terminator 3 digit impedance code, followed by alpha modifier (see impedance codes table) f = 1 % g = 2 % j = 5 % ej = lead (pb)-free, tube ea = lead (pb)-free, tape and reel dc = tin/lead, tube rz = tin/lead, tape and reel blank = standard (dash number) (up to 3 digits) from 1 to 999 as applicable historical part number example: sogc1605221331g (will continue to be accepted) sogc 16 05 221 331 g r61 historical model pin count schematic resistance value 1 resistance value 2 tolerance code packaging p x r c d g 0 k 0 1 3 0 0 2 c g o s z r g a 1 3 1 5 0 6 1 c g o s
document number: 31506 for technical questions, contact: ff2aresistors@vishay.com www.vishay.com revision: 27-apr-10 407 sogc 01, 03, 05 thick film resistor networ ks, dual-in-line, wide body, small outline, molded dip, surface mount vishay dale dimensions in inches (millimeters) global model ab sogc16 0.440 (11.18) 0.350 (8.89) sogc20 0.540 (13.72) 0.450 (11.43) 0.105 (2.67) 0.100 (2.54) 0.010 0.005 (0.254 0.127) 0.406 0.012 (10.31 0.305) 0.02 8 0.010 (0.711 0.254) typ. 0.00 8 (0.203) 0.295 (7.49) 0.045 (1.14) ref. pin 1 0.045 (1.14) a 0.050 (1.27) non-accum. t yp. 0.01 8 (0.457) typ. b sogc 0.006 (0.152) max. typ. technical specifications parameter unit sogc16 sogc20 package power rating (max. at + 70 c) w 1.6 2.0 tcr tracking (- 55 c to + 125 c) ppm/c 50 voltage coefficient of resistance ppm/v < 50 typical maximum operating voltage v dc 50 operating temperature range c - 55 to + 125 storage temperature range c - 55 to + 150 mechanical specifications marking model number, schematic number, value tolerance, pin 1 indicator, date code marking resistance to solvents permanency testing per mil-std-202, method 215 maximum solder reflow temperature + 255 c solderability per mil-std-202, method 208e terminals copper alloy. solder dipped terminal body molded epoxy
sogc 01, 03, 05 vishay dale thick film resistor networ ks, dual-in-line, wide body, small outline, molded dip, surface mount www.vishay.com for technical questions, contact: ff2aresistors@vishay.com document number: 31506 408 revision: 27-apr-10 impedance codes code r 1 ( )r 2 ( )coder 1 ( )r 2 ( ) 500b 82 130 141a 270 270 750b 120 200 181a 330 390 800c 130 210 191a 330 470 990a 160 260 221b 330 680 101c 180 240 281b 560 560 111c 180 270 381b 560 1.2k 121b 180 390 501c 620 2.7k 121c 220 270 102a 1.5k 3.3k 131a 220 330 202b 3k 6.2k circuit applications 01 schematic 15 or 19 resistors with one pin common the sogcxx01 circuit provides a choice of 15 or 19 nominally equal resistors, each connected between a common lead (16 or 20) and a discrete pc board pin. commonly used in the following applications: ? mos/rom pull-up/pull-down ? ttl input pull-down ? open collector pull-up ? digital pulse squaring ? ?wired or? pull-up ? ttl unused gate pull-up ? power driven pull-up ? hi gh speed parallels pull-up 03 schematic 8 or 10 isolated resistors the sogcxx03 circuit provides a choice of 8 or 10 nominally equal resistors with each resistor isolated from all ot hers and wired directly across. commonly used in the following applications: ? ?wired or? pull-up ? long- line impedance balancing ? power driven pull-up ? led current limiting ? powergate pull-up ? ecl output pull-down ? line termination ? ttl input pull-down 05 schematic ttl dual-line terminator; pulse squar ing, 14 or 18 pairs of resistors (r 1 resistors are common to leads 16 or 20) (r 2 resistors are common to leads 8 or 10) the sogcxx05 circuit contains 14 or 18 pairs of resistors. each pair is connected between ground and a common line. the junctions of these resistor pairs are connected to the input leads. the 05 circuits are designed for ttl du al-line termination and pulse squaring. sogc16 sogc20 pin 1 sogc16 sogc20 pin 1 r1 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r1 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r2 r2 sogc16, sogc20 pin 1
document number: 31506 for technical questions, contact: ff2aresistors@vishay.com www.vishay.com revision: 27-apr-10 409 sogc 01, 03, 05 thick film resistor networ ks, dual-in-line, wide body, small outline, molded dip, surface mount vishay dale ambient temperature c 2.0 1.6 1.0 0.19 0.10 sin g le resistor sogcxx03 sogcxx01 & 05 sogc2001, 03, 05 pk g . sogc1601, 03, 05 pk g . deratin g power ratin g (w) - 50 0 + 25 + 70 + 125 + 150 performance test max. r (typical test lots) power conditioning 0.50 % r thermal shock 0.50 % r short time overload 0.25 % r low temperature operation 0.25 % r moisture resistance 0.50 % r resistance to soldering heat 0.25 % r shock 0.25 % r vibration 0.25 % r load life 0.50 % r terminal strength 0.25 % r insulation resistance 10 000 m (minimum) dielectric withstanding voltage no evidence of arcing or damage (200 v rms for 1 min)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
